If You Must Use
8-foot 1"x2"s

Part of Our Booth Display Panels

You will have more waste than you would using 10-foot pieces. You will need four 1"x2" boards all together.

Instructions

1. From the first two 8-foot 1"x2"s, cut a 78" side piece (with a 45° miter cut on one end).
2. From the third board, cut one of the 32" cross pieces with a square (90°) cut. Then cut the 35" top piece with two 45° miter cuts.
3. From the last board, cut the remaining 32" cross piece as above.